View source for NSE-X2 connections and environmental specifications


[[File:WIP.jpg|center|150px|WIP.jpg]]

=== Network connections (appliance rear view) ===

This picture shows the minimal set of ports that must be connected in order to operate normally.

Port 1: MANagement port: this port must be connected to a local switchport.

Port 2: not connected.

Port 3: MONitor port: this port must be connected to the SPAN representing the traffic FROM the network*.

Port 4: MONitor port: this port must be connected to the SPAN representing the traffic TO the network*.

Port 5: (SFP not present), not connected.

Port 6: (SFP not present), not connected.

(*) See configuration examples for Alcatel Lucent

(*) See configuration examples for Cisco

&nbsp;

=== System dimensions ===

Width:&nbsp;

Hight:&nbsp;

Depth:&nbsp;

&nbsp;

=== Weight ===

kg

&nbsp;

=== PSU specifications ===

PSU (Power): 2x 1100W (IEC320 C14 connector)

Maximum heat dissipation: 4100BTU/h

Frequency: 50Hz

Voltage: 240V AC

Maximum current: 6.5A

Power based on observation: 500W maximum, 350W average (both PSU powered)

&nbsp;

&nbsp;