Firewall ports: Difference between revisions

Latest revision as of 15:51, 21 July 2018

Please remember that Pulse, Software nPoint and Hardware nPoint are communication the same way.

In general, nPoint is contacting the nGeniusPULSE Server, not the other way around.

Service Test are executed by the nPoint. Device monitoring is done by nGeniusPULSE server or a Collector.

Even when there's no Service Test running on the nPoint, the nPoint will contact nGeniusPULSE Server every minute to update its configuration.

destination	service	role
tcp/8443	https	communication with nGeniusONE
tcp/443	https	secure web UI communication with nPoint
tcp/80	http	web UI
udp/514	syslog	syslog receiver
tcp/22	ssh	CLI
udp/123	ntp	network time server

destination	service	role
udp/123	ntp	network time synchronozation
udp/161	snmp	snmp
tcp/443	https	communication with virtual center and wireless controller
ip protocol #1 type 0 and 8	icmp echo request/reply	ping monitorred devices
tcp/25	smtp	email
tcp/386	ldap	remote authentication
tcp/636	sldap	secure remote authentication

(*) outbound services are depending on the features that are in use.

destination	service	role
tcp/80	http	web UI
tcp/22	ssh	CLI

destination	service	role
tcp/443	https	communication with nPoint

(*) outbound services are depending on the Service Test configured.

Revision as of 15:50, 21 July 2018 (view source) Bert (talk \| contribs) No edit summary ← Older edit		Latest revision as of 15:51, 21 July 2018 (view source) Bert (talk \| contribs) No edit summary
Line 128:		Line 128:
	\|}		\|}

	(*) outbound services are depending on the Service Test configured ~~on nGeniusPULSE~~.		(*) outbound services are depending on the Service Test configured.