VNSE quick start guide: Difference between revisions

From wiki.comcert.com
Jump to navigation Jump to search
(Created page with " == Introduction == VNSE is a virtual machine that contains a vSTREAM Agent and acts in the same way as a vSTREAM.   == Solution == === Installation === ==== Deploy...")
 
No edit summary
Line 6: Line 6:
 
 


== Solution ==
== Installation ==


=== Installation ===
=== Step 1: deploy ovf ===
 
==== Deploy ovf ====


VNSE is shipped as a zipped folder that contains all required file to deploy the virtual machine.  VNSE can be deployed on ESXi 5.5 or higher.
VNSE is shipped as a zipped folder that contains all required file to deploy the virtual machine.  VNSE can be deployed on ESXi 5.5 or higher.
Line 26: Line 24:
The second NIC is used for <u>monitoring</u> and must be connected to a port group that allows monitoring of all VLAN on the hypervisior.&nbsp; For the moment, leave this interface assigned&nbsp;to "VM Network".
The second NIC is used for <u>monitoring</u> and must be connected to a port group that allows monitoring of all VLAN on the hypervisior.&nbsp; For the moment, leave this interface assigned&nbsp;to "VM Network".


Start the virtual machine
=== Step 2: start virtual machine ===


&nbsp;
The COMCERT eningeer will take over from here.


&nbsp;
&nbsp;

Revision as of 17:37, 24 February 2020

Introduction

VNSE is a virtual machine that contains a vSTREAM Agent and acts in the same way as a vSTREAM.

 

Installation

Step 1: deploy ovf

VNSE is shipped as a zipped folder that contains all required file to deploy the virtual machine.  VNSE can be deployed on ESXi 5.5 or higher.

After deployment, the vm will have the following properties:

  • 2 CPU
  • 4GB RAM
  • HD1 = 65GB
  • HD2 = 235GB
  • Two NIC

The first NIC is used for management and must be assigned to the corresponding port group in VMware.  The COMCERT engineer will configure a static IP after deployment.

The second NIC is used for monitoring and must be connected to a port group that allows monitoring of all VLAN on the hypervisior.  For the moment, leave this interface assigned to "VM Network".

Step 2: start virtual machine

The COMCERT eningeer will take over from here.