NSE-X2 connections and environmental specifications: Difference between revisions

From wiki.comcert.com
Jump to navigation Jump to search
No edit summary
No edit summary
Line 23: Line 23:


 
 


=== System dimensions ===
=== System dimensions ===


Width: 
Width: 220mm (without mounting brackets) 430mm (with 19" mounting brachets)


Hight: 
Hight: 44mm


Depth: 
Depth: 105mm


 
 

Revision as of 13:58, 11 August 2020

WIP.jpg
WIP.jpg

Network connections (appliance rear view)

This picture shows the minimal set of ports that must be connected in order to operate normally.

Port 1: MANagement port: this port must be connected to a local switchport.

Port 2: not connected.

Port 3: MONitor port: this port must be connected to the SPAN representing the traffic FROM the network*.

Port 4: MONitor port: this port must be connected to the SPAN representing the traffic TO the network*.

Port 5: (SFP not present), not connected.

Port 6: (SFP not present), not connected.

(*) See configuration examples for Alcatel Lucent

(*) See configuration examples for Cisco

 


System dimensions

Width: 220mm (without mounting brackets) 430mm (with 19" mounting brachets)

Hight: 44mm

Depth: 105mm

 

Weight

kg

 

PSU specifications

PSU (Power): 2x 1100W (IEC320 C14 connector)

Maximum heat dissipation: 4100BTU/h

Frequency: 50Hz

Voltage: 240V AC

Maximum current: 6.5A

Power based on observation: 500W maximum, 350W average (both PSU powered)