NSE-X2 connections and environmental specifications: Difference between revisions

Revision as of 14:07, 11 August 2020

This picture shows the minimal set of ports that must be connected in order to operate normally.

Port 1: MANagement port: this port must be connected to a local switchport.

Port 2: not connected.

Port 3: MONitor port: this port must be connected to the SPAN representing the traffic FROM the network*.

Port 4: MONitor port: this port must be connected to the SPAN representing the traffic TO the network*.

Port 5: (SFP not present), not connected.

Port 6: (SFP not present), not connected.

(*) See configuration examples for Alcatel Lucent

(*) See configuration examples for Cisco

Width: 220mm (without mounting brackets) 430mm (with 19" mounting brachets)

Hight: 44mm

Depth: 105mm

kg (without mounting brackets)

PSU (Power): External power supply (IEC320 C14 connector)

Maximum heat dissipation:

Frequency: 50Hz - 60Hz

Voltage: 100V - 240V AC

Maximum current: 1.5A

Power based on observation:

Temperature: 0°C - 40°C

Humidity: 10% - 80% RH non-condensing

Vibration: 0.5Grms / 5Hz ~ 500Hz

Shock: 10G

@@ Line 24: / Line 24: @@
 &nbsp;
+&nbsp;
 === System dimensions ===
@@ Line 37: / Line 38: @@
 === Weight ===
-kg
+kg (without mounting brackets)
 &nbsp;
@@ Line 43: / Line 44: @@
 === PSU specifications ===
-PSU (Power): 2x 1100W (IEC320 C14 connector)
+PSU (Power): External power supply&nbsp;(IEC320 C14 connector)
-Maximum heat dissipation: 4100BTU/h
+Maximum heat dissipation:&nbsp;
-Frequency: 50Hz
+Frequency: 50Hz - 60Hz
-Voltage: 240V AC
+Voltage: 100V - 240V AC
-Maximum current: 6.5A
+Maximum current: 1.5A
-Power based on observation: 500W maximum, 350W average (both PSU powered)
+Power based on observation:&nbsp;
 &nbsp;
+=== Operating parameters ===
+Temperature: 0°C - 40°C
+Humidity: 10% - 80% RH non-condensing
+Vibration: 0.5Grms / 5Hz ~ 500Hz&nbsp;
+Shock: 10G
 &nbsp;