NGeniusONE Server requirements

Introduction

Please note that these are NOT Netscout's official recommendations; sizes are based on COMCERT's long-term experience.

COMCERT builds, installs and maintains nGeniusOne Server on virtual as well as physical appliances.

Our virtual and physical appliances are available as turnkey solutions, including our almost 20 years of experience in building, installing and operating test and measurement equipment.

Contact your sales representative for more information about our appliances.

 

Solution

Minimum system requirements for nGeniusONE on Virtual Performance Appliance 45

VPMA-45 is COMCERT's foundation for nGeniusONE Server.  It offers the greatest flexibility to install, upgrade and operate nGenius Server in a secure private datacenter. The virtual appliance is build from OVF template i.e., you do not have to create the virtual machine.  Just make sure the resources are available in your virtual environment at time of deployment.  You also need to knwo what datastore to use and the name of the virtual port group to connect the management interface.

These are the properties of the VM (deployed from OVF):

• VM version 10 (for ESXi 5.5 or higher - can be upgraded after installation)
• OS Centos 7 with Open VMware Tools* installed and running
• 8 CPU#
• 48GB memory#
• 1 NIC (VMXNET3)
• 1 SCSI controller (LSI Logic Parallel)
• First hard disk: 65GB (thick provision, lazy zeroed)
• Second hard disk: 500GB (thick provision, lazy zeroed)

(*) per VMware recommendation: https://kb.vmware.com/s/article/2073803?lang=en_US

(#) The number of CPU and memory size can be reduced immediately after installation to as few as 4 CPU and 32GB RAM, depending on the system load.  However, during installation the specified values need to be available or the installer will halt.  In some rare high-load cases, the memory size may have to be increased to 64GB.