Restart and safe shutdown: Difference between revisions
Jump to navigation
Jump to search
(Created page with " == Introduction == == Solution == === Stop/restart === Login to the CLI Run the following commands <pre>services stop aed services start aed</pre> === Sh...") |
No edit summary |
||
| Line 1: | Line 1: | ||
== Introduction == | == Introduction == | ||
In order to avoid file corruption and loss of data, services on AED must be terminated before shutting down the appliance. | |||
| | ||
Revision as of 07:14, 31 October 2022
Introduction
In order to avoid file corruption and loss of data, services on AED must be terminated before shutting down the appliance.
Solution
Stop/restart
Login to the CLI
Run the following commands
services stop aed services start aed
Shutdown
Shutting down and rebooting the AED could take several minutes to complete. If the AED is situated in-line and has no bypass function, this will result in an interruption of the link for the same amount of time.
Login to the CLI
Run the following commands
services stop aed shutdown