Patch Cord Adapters: Difference between revisions

From wiki.comcert.com
Jump to navigation Jump to search
No edit summary
No edit summary
Line 37: Line 37:
These adapters are also available as a set of two adapters.
These adapters are also available as a set of two adapters.


Just like the tip of the PLA004 or PLA804 Permanent Link adapter, the jack of a Patch Cord adapter need to be replaced when damaged or worn out. 
 
 
{{#invoke:Message box|ambox |type=content|text=Like the tip of the Permanent Link adapter, the jack of a Patch Cord adapter need to be replaced when damaged or worn out.}}
 
 


These are the corresponding spare parts:
These are the corresponding spare parts:

Revision as of 20:26, 27 January 2020

Introduction

The new test paradigm Modular Link Terminated Link (MPTL) requires the use of one Patch Cord Adapter wich is not included in any Versiv test kit.

Please contact your Fluke Networks reseller to get a quote.

 

Solution

 

 

You'll need one Patch Cord adapter per pair of DSX modules for MPTL testing.

Patch Cord Adapters that are available and suitable for both DSX-5000 and DSX-8000 modules:

Model Desription
DSX-PC5E Single Cat 5e Adapter with Shielded Cat 5e Patch Cord Jack Installed
DSX-PC6 Single Cat 6 Adapter with Shielded Cat 6 Patch Cord Jack Installed
DSX-PC6A Single Cat 6A Adapter with Shielded Cat 6A Patch Cord Jack Installed

These adapters are also available as a set of two adapters.

 

 

These are the corresponding spare parts:

Model Desription
DSX-PCTAC5EKS Set of two Shielded Cat 5e Replacement Patch Cord Jacks
DSX-PCTAC6KS Set of two Shielded Cat 6 Replacement Patch Cord Jacks
DSX-PCTAC6AKS Set of two Shielded Cat 6A Replacement Patch Cord Jacks