Firewall ports
Introduction
Solution
Please remember that Pulse, Software nPoint and Hardware nPoint are communication the same way.
Inbound nGeniusPULSE server
| destination | service | role |
|---|---|---|
| tcp/8443 | https | communication with nGeniusONE |
| tcp/443 | https |
secure web UI communication with nPoint |
| tcp/80 | http | web UI |
| udp/514 | syslog | syslog receiver |
| tcp/22 | ssh | CLI |
| udp/123 | ntp | network time server |
Outbound nGeniusPULSE server*
| destination | service | role |
|---|---|---|
| udp/123 | ntp | network time synchronozation |
| udp/161 | snmp | snmp |
| tcp/443 | https |
communication with virtual center and wireless controller |
| ip protocol #1 type 0 and 8 | icmp echo request/reply | ping monitorred devices |
(*) outbound services are depending on the features that are in use.
Inbound nPoint
| destination | service | role |
|---|---|---|
| tcp/80 | http | web UI |
| tcp/22 | ssh | CLI when enabled |
Outbound nPoint*
| destination | service | role |
|---|---|---|
| tcp/443 | https | communication with nPoint |
(*) outbound services are heavily depending on the Service Test that are configured on nGeniusPULSE.