Firewall ports
Introduction
Solution
Please remember that Pulse, Software nPoint and Hardware nPoint are communication the same way.
Inbound nGeniusPULSE server
| destination | service | role |
|---|---|---|
| tcp/8443 | https | communication with nGeniusONE |
| tcp/443 | https |
secure web UI communication with nPoint |
| tcp/80 | http | web UI |
| udp/514 | syslog | syslog receiver |
| tcp/22 | ssh | CLI |
| udp/123 | ntp | network time server |
Outbound nGeniusPULSE server*
| destination | service | role |
|---|---|---|
| udp/123 | ntp | network time synchronozation |
| udp/161 | snmp | snmp |
| tcp/443 | https |
communication with virtual center and wireless controller |
| ip protocol #1 type 0 and 8 | icmp echo request/reply | ping monitorred devices |
(*) outbound services are depending on the features that are in use.
Inbound nPoint
| destination | service | role |
|---|---|---|
| tcp/80 | http | web UI |
| tcp/22 | ssh | CLI when enabled |
Outbound nPoint*
| destination | service | role |
|---|---|---|
| tcp/443 | https | communication with nPoint |
(*) outbound services are depending on the Service Test configured on nGeniusPULSE.
Even when there's no Service Test running on the nPoint, the nPoint will contact nGeniusPULSE server every minute to update its configuration.