Patch Cord Adapters

From wiki.comcert.com
Revision as of 19:27, 22 January 2020 by Bert (talk | contribs) (Created page with " Introduction The new test paradigm Modular Link Terminated Link (MPTL) requires the use of one Patch Cord Adapter wich is not included in any Versiv test kit. Solution Be...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

The new test paradigm Modular Link Terminated Link (MPTL) requires the use of one Patch Cord Adapter wich is not included in any Versiv test kit.

Solution

Be aware that contrary to the channel adapter, the Patch Cord adapter is category specific. and that the connector may need to be replaced when damaged or worn out.

Patch Cord Adapters that are available. They a suitable for DSX-5000 and well as DSX-8000 modules:

Model Desription
DSX-PC5E Single Cat 5e Adapter with Shielded Cat 5e Patch Cord Jack Installed
DSX-PC6 Single Cat 6 Adapter with Shielded Cat 6 Patch Cord Jack Installed
DSX-PC6A Single Cat 6A Adapter with Shielded Cat 6A Patch Cord Jack Installed
DSX-PC5ES Set of two Cat 5e Adapters with Shielded Cat 5e Patch Cord Jack Installed
DSX-PC6S Set of two Cat 6 Adapters with Shielded Cat 6 Patch Cord Jack Installed
DSX-PC6AS Set of two Cat 6A Adapters with Shielded Cat 6A Patch Cord Jack Installed

Just like the tip of a PLA004 or PLA804 adapter the jack may need to be replaced when damaged or worn out.  These are the spare parts:

Model Description
DSX-PCTAC5EKS Set of two Shielded Cat 5e Replacement Patch Cord Jacks
DSX-PCTAC6KS Set of two Shielded Cat 6 Replacement Patch Cord Jacks
DSX-PCTAC6AKS Set of two Shielded Cat 6A Replacement Patch Cord Jacks