VNSE quick start guide

From wiki.comcert.com
Revision as of 17:34, 24 February 2020 by Bert (talk | contribs) (Created page with " == Introduction == VNSE is a virtual machine that contains a vSTREAM Agent and acts in the same way as a vSTREAM.   == Solution == === Installation === ==== Deploy...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

VNSE is a virtual machine that contains a vSTREAM Agent and acts in the same way as a vSTREAM.

 

Solution

Installation

Deploy ovf

VNSE is shipped as a zipped folder that contains all required file to deploy the virtual machine.  VNSE can be deployed on ESXi 5.5 or higher.

After deployment, the vm will have the following properties:

  • 2 CPU
  • 4GB RAM
  • HD1 = 65GB
  • HD2 = 235GB
  • Two NIC

The first NIC is used for management and must be assigned to the corresponding port group in VMware.  The COMCERT engineer will configure a static IP after deployment.

The second NIC is used for monitoring and must be connected to a port group that allows monitoring of all VLAN on the hypervisior.  For the moment, leave this interface assigned to "VM Network".

Start the virtual machine