CheckYourNetwork Profile

From wiki.comcert.com
Revision as of 12:21, 24 June 2018 by Bert (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

The AirCheck G2 profile you are about to download has been modified from the Default profile. It is an addendum to our "Wireless Network Troubleshooting with the AirCheck G2" training materials.

  • Custom thresholds during autotest
  • Credentials for classroom networks CRT-TST5 (hidden) and CRT-TST24
  • Signal Level Filtering to ignore AP and STA with signal below -85dBm 

This profile is provided as a service to our trainees and comes with ABSOLUTELY NO WARRANTY OR SUPPORT.

 

Solution

Step 1: download the profile using this direct link

Step 2: if not done already, install AirCheck G2 Manager on your computer

Step 3: copy the profile to My Computer > Documents > AirCheck 2 Manager > Profiles

Step 4: start or restart AirCheck G2 Manager and go tot Profile Setup

Step 5: connect the tester

Step 6: transfer the Local Profile (COMCERT_ACG2) to the tester

Retrieved from "https://wiki.comcert.com/index.php?title=CheckYourNetwork_Profile&oldid=3261"