PMA-2XX Physical installation connections and environmental specifications
Appliance rear view
This is the minimal set of ports that must be connected.
System dimensions
Width (19"): 430.0mm
Hight (2U): 86.8mm
Depth: 715.5mm
Weight
33.1kg
PSU specifications
PSU (Power): 2x 1100W (IEC320 C14 connector)
Heat dissipation: 4100BTU/h
Frequency: 50Hz
Voltage: 240V AC autoranging
Current: 6.5A
Server power consumption based on observation: 500W maximum, 400W average (both PSU powered)
Network connections
Located on the server's motherboard:
Out-of-band management and virtual console (iDRAC): 1x 1000BASE-T
Management (MGT): 2x 1000BASE-T and 2x 10GBASE-T. At least one of these ports must be connected to a switch port.
Located on the ASI Accelerator NIC:
Monitor (MON): 4x SFP+. The slots are empty and must be equipped with fiber optic transceivers. Copper transceivers are not supported. One or more of these ports will be connected to a SPAN or TAP.