Upgrade procedure for non Link-Live users

From wiki.comcert.com
Revision as of 19:05, 8 January 2019 by Bert (talk | contribs)
Jump to navigation Jump to search

Introduction

If your unit is claimed to Link-Live then we highly recommend following the Firmware Update procedure via Link-Live.
If for any reason your unit is not claimed in Link-Live, then you will need to follow the manual update procedure below.

 

Solution

  • Download the latest firmware from MyNetscout here. Don't unzip; just copy the zip file to the micro SD card provided with the unit
  • Power off your LRG2 unit
  • Press and hold (at the same time) the volume-up button and the power button on your LRG2 unit
  • The LRG2 unit will power on and enter recovery mode
  • Use the volume buttons up/down to select “apply update from SD card”, and use the power button to confirm the selection

https://netscout.desk.com/customer/portal/attachments/839586

  • Use the volume buttons up/down to select the LRG2 firmware that you copied to the micro SD card and select upgrade

https://netscout.desk.com/customer/portal/attachments/839587

https://netscout.desk.com/customer/portal/attachments/839588

 

 

 

 

 

 

Retrieved from "https://wiki.comcert.com/index.php?title=Upgrade_procedure_for_non_Link-Live_users&oldid=3899"