Virtual machine from OVF properties

From wiki.comcert.com
Revision as of 07:11, 31 July 2019 by Bert (talk | contribs)
Jump to navigation Jump to search

Introduction

InfiniStream virtual appliances are build from OVF.

These are the properties of the vitual machines immediately after deployment.

Solution

nGenius Flow Collector Virtual Appliance (SKU: V-03300-32-PA)

Virtual Hardware Size
CPU 8
Memory 8 GB
Hard Disk 1 50 GB (Thick Provisioned)
Hard Disk 2 *
Network adapter 1 E1000
Network adapter 2 <absent>
Network adapter 3 <absent>

The size of the second hard disk that will serve as data store, is configurable during ovf deployment. 

The size of this hard disk depends on the number of flows per second received form the flow exporting devices and the number of days you want session details to remain available.

Use this table for guidance.

Flow per second Retention Hard Disk 2 Size
5k 7 d 200 GB
20k 7 d 800 GB
50k 7 d 2 TB
5k 14 d 400 GB
20k 14 d 1600 GB
50k 14 d 4 TB

This second hard disk shall be Thick Provisioned.

 

vSTREAM STL (SKU: VSTREAM-0-008)

Virtual Hardware Size
CPU 2
Memory 2 GB
Hard Disk 1 32 GB (Thick Provisioned)
Hard Disk 2 *
Network adapter 1 VMXNET3
Network adapter 2 <absent>
Network adapter 3 <absent>

The size of the second hard disk that will serve as data store, is configurable during ovf deployment. 

The size of this hard disk depends on the expected traffic volume. 

Please note that at full line rate of 1Gb/s, a 100GB hard disk will retain packets for less than 15 minutes !