VNSE quick start guide

From wiki.comcert.com
Revision as of 17:37, 24 February 2020 by Bert (talk | contribs)
Jump to navigation Jump to search

Introduction

VNSE is a virtual machine that contains a vSTREAM Agent and acts in the same way as a vSTREAM.

 

Installation

Step 1: deploy ovf

VNSE is shipped as a zipped folder that contains all required file to deploy the virtual machine.  VNSE can be deployed on ESXi 5.5 or higher.

After deployment, the vm will have the following properties:

  • 2 CPU
  • 4GB RAM
  • HD1 = 65GB
  • HD2 = 235GB
  • Two NIC

The first NIC is used for management and must be assigned to the corresponding port group in VMware.  The COMCERT engineer will configure a static IP after deployment.

The second NIC is used for monitoring and must be connected to a port group that allows monitoring of all VLAN on the hypervisior.  For the moment, leave this interface assigned to "VM Network".

Step 2: start virtual machine

The COMCERT eningeer will take over from here.

 

 

 

 

 

Retrieved from "https://wiki.comcert.com/index.php?title=VNSE_quick_start_guide&oldid=5592"