Difference between revisions of "NVP for generic cable types"
From COMCERT Wiki
Line 10: | Line 10: | ||
These are the values for NVP (%) for some common types of twisted-pair cable. | These are the values for NVP (%) for some common types of twisted-pair cable. | ||
− | Standards stipulate that NVP must be specified | + | Standards stipulate that NVP must be specified at 10MHz signal at 20°C (68°F). |
(Source: [https://www.flukenetworks.com Fluke Networks]) | (Source: [https://www.flukenetworks.com Fluke Networks]) |
Revision as of 15:10, 7 April 2024
Introduction
Correct configuration of NVP ensures the most accurate determination of cable length during testing.
Solution
These are the values for NVP (%) for some common types of twisted-pair cable.
Standards stipulate that NVP must be specified at 10MHz signal at 20°C (68°F).
(Source: Fluke Networks)
Category | U/UTP | U/FTP | F/UTP | S/FTP |
---|---|---|---|---|
5e | 69 | - | 69 | - |
6 | 69 | 74 | 70 | - |
6A | 68.2 | 74 | 74 | 77 |
7 | - | - | - | 78 |
7A | - | - | - | 78 |
8 | - | - | - |
72 |