ISNG model 6695 Connections

From wiki.comcert.com
Jump to navigation Jump to search

Network connections (server rear view)

 

IS66XXConnectionsWikiRes.png
IS66XXConnectionsWikiRes.png

 

Required connections (as pictured)

Network interfaces located on the SUPERMICRO Server motherboard:

  • Management network interface Eth0 (1000GBASE-T/10GBASE-T).
  • Remote Management Module RMM interface (1000GBASE-T).

Network interfaces located on the NETSCOUT ASI Accelerator NIC:

  • Monitor interfaces (SFP+). These docks are empty and must be equipped with compatible 10G SFP+ fiber optic transceivers.  Copper transceivers are not supported.  The use of auto sensing (1/10G) transceivers is not recommended.  At least one of these ports should be connected to a SPAN or TAP output.  These ports are system named from top to bottom if3, if4, if5 and if6.

 

Optional connections

Optional connections located on the appliance motherboard:

  • Management network interface Eth1 (10GBASE-T) for redundancy
  • Serial Console 57600 baud, 8N1 
  • 4x USB 3
  • VGA

 

 

Environment specifications

Power supply: dual auto-ranging hot-swappable, redundant power supplies. 1200W: 200-240VAC, 8.5-7A, 50–60 Hz.

Power consumption (measured one hour average power consumption): 275W or 938BTU/h

Dimensions: 3U Rack Mount (static rails)

Weight without rails: 27kg