OptiView XG Remote UI
Introduction
The OptiView Remote User Interface is identical to the application running on the tablet. The application is installed on a PC and will connect to the Acquisistion Board of the OptiView XG.
Solution
Installation
Open a browser to http://<IP-OPVXG>
<IP-OPVXG> can be any IP used by OPVXG (network port, management port, wireless port) at the moment.
Download and select "Install Remote UI".
Use
The RUI application consists of two parts: the OptiView Brower and the actual Remote User Interface.
Use the brower to connect to the OptiView. If you are on the same subnet, the brower will find the OptiView automatically (without the need to enter its IP address).
Firewall
The RUI will use the following protocols and ports:
tcp/1695
udp/1695
and is a few (older) versions:
tcp/1697
