New pages
Jump to navigation
Jump to search
- 09:13, 11 April 2025 Connector Types (hist | edit) [712 bytes] Bert (talk | contribs) (Created page with "=== IEC 60603-7 === RJ45 8 contacts Rated at 2000MHz (Cat 3 - 6A and 8.1) ISO/IEC 11801 Class C - EA and Class I === IEC 60603.7-71 === GG45 12 contacts (has a switch) Rated at 1000MHz (Cat 7 - 7A) ISO/IEC 11801 Class F - FA === IEC 61076-3-110 === Augmented RJ45 ARJ45 8 contacts Rated at 3000MHz (Cat 7 - 7A and 8.2) ISO/IEC 11801 Class F - FA and Class II === IEC 61076-3-104 === TERA 8 contacts Rated at 2000MHz (Cat 7 - 7A and 8.2) ISO/IEC 11801 Class F - F...") Tag: Visual edit
- 17:09, 10 April 2025 Category 8/Class I/Class II (hist | edit) [1,893 bytes] Bert (talk | contribs) (Created page with "IEEE 802.3bq 25G/40GBASE-T This standard was published on September 8th, 2016. It defines minimum transmission characteristics for the application on a twisted pair channel to support 25Gbps and 40Gbps Ethernet over twisted pair cabling. These applications are aimed at datacenters. ISO/IEC TR 11801-9901:2014 This technical report addresses point-to-point connections between active devices in data centers. This includes specifying a maximum distance of 30 meters,...") Tag: Visual edit
- 16:41, 10 April 2025 Structured Cabling (hist | edit) [89 bytes] Bert (talk | contribs) (Created page with "=== Category 8/Class I/Class II === Category:Private") Tag: Visual edit
- 19:05, 17 March 2025 NSE-30 Administrator Guide (hist | edit) [5,929 bytes] Bert (talk | contribs) (Created page with "== Introduction == Congratulation with the purchase of the NSE-22. This small but powerfull device will allow you to extend nGeniusONE and nGeniusPULSE capabilities to remote sites. Please taken a moment to review these important installation steps and configuration guidelines. These procedures have been checked with version 6.3.5 of the nGeniusONE vStream software. == Solution == === Physical properties === {| border="1" cellpadding=...")
- 03:09, 28 February 2025 vSTREAM Agent on Windows Desktop (hist | edit) [2,728 bytes] Bert (talk | contribs) (Created page with "Introduction VStream Agent for Windows cannot be installed on a desktop OS like Windows 10 or 11. Solution Procedure for Windows 1O (20H2) Important: vStrea")
- 15:15, 15 February 2025 No connected devices with snmp version 3 (hist | edit) [1,317 bytes] Bert (talk | contribs) (Created page with "== Introduction == With SNMPv3, "contexts" were introduced. Without a context specified in the configuration of the CISCO switch, Discovery will only show connected devices for ports that are member of VLAN 1. == Solution == Start with upgrading the tool's firmware to at least version 2.7. In order to display the devices connected to the ports for all VLANs, you must specify a context for each VLAN on the switch. Basically, you need one line of configuration per...") Tag: Visual edit
- 15:01, 15 February 2025 NoPublicNETALLY (hist | edit) [75 bytes] Bert (talk | contribs) (Created page with "=== No connected devices with snmp version 3 ===") Tag: Visual edit
- 15:20, 6 February 2025 VPMA-49 (hist | edit) [5,272 bytes] Bart (talk | contribs) (Created page with "BJA start new page") Tag: Visual edit
- 09:32, 19 January 2025 IEEE 802.1X (hist | edit) [435 bytes] Bert (talk | contribs) (Created page with "=== Working CISCO config (CRT-DEV-SW113) === interface GigabitEthernet1/0/2 switchport access vlan 2 switchport mode access authentication event fail action authorize vlan 70 authentication port-control auto dot1x pae authenticator no mdix auto spanning-tree portfast edge ! radius server crt-vir-l-radius address ipv4 10.165.10.205 auth-port 1812 acct-port 1813 key 7 03055908025E731F1A") Tag: Visual edit