PMA-2XX quick start guide: Difference between revisions
No edit summary |
No edit summary |
||
| Line 21: | Line 21: | ||
|- | |- | ||
! scope="col" | Parameter | ! scope="col" | Parameter | ||
! scope="col" | MGT | ! scope="col" | MGT (IP_PMA) | ||
! scope="col" | iDAC | ! scope="col" | iDAC (IP_IDRAC) | ||
|- | |- | ||
| IP address | | IP address | ||
Revision as of 12:29, 16 January 2022
Introduction
COMCERT PMA-2XX is a custom-build appliance optimized for running NETSCOUT InfiniStream. This guide will assist you in configuring the appliance for first use.
Solution
Physical installation and connections
Please visit PMA-2XX Physical installation, connections and environmental specifications for detailed information on how to install the appliance and connect it to the network.
IP configuration
The appliance management (MGT) and out-of-band (iDRAC) interface comes pre configured with the following IP parameters.
| Parameter | MGT (IP_PMA) | iDAC (IP_IDRAC) |
|---|---|---|
| IP address | 192.168.0.1 | 192.168.1.1 |
| IP subnet mask | 255.255.255.0 | 255.255.255.0 |
| Default router | 192.168.0.1 | 192.168.1.1 |
| DNS Server | 192.168.0.1 | 192.168.1.1 |
| Domain suffix | comcert.com | comcert.com |
| NTP Server | 192.168.0.1 | 192.168.1.1 |
To access the appliance either by its management interface of out-of-band interface, use a laptop with a static IP address in the same IP subnet as the respective interface and a standard four-pair twisted-pair cable. The management interface is only accessible using the ssh protocol. The out-of-band interface is accessible by either https (preference) or ssh. For default credentials please visit Default credentials . Please make sure to change these default passwords and store them is a sale place.
Changing the IP configuration