ISNG model 6695 Connections: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 19: | Line 19: | ||
==== Optional connections located on the appliance motherboard (primarily used for KVM): ==== | ==== Optional connections located on the appliance motherboard (primarily used for KVM): ==== | ||
*Serial Console | *Serial Console 57600 baud, 8N1 | ||
*4x USB 3 | *4x USB 3 | ||
*VGA | *VGA | ||
*Network interface Eth1 (1000BASE-T, disabled) | *Network interface Eth1 (1000BASE-T, disabled) | ||
Revision as of 16:00, 18 July 2022
Network connections (appliance rear view)
Mandatory connections located on the appliance motherboard:
- Management interface (Eth0): This is a 1000BASE-T Ethernet interface. Attention, only this port (Eth0) must be connected to the network (InfiniStream does not support redundant connections).
- Dedicated remote management module (RMM). This is a 1000BASE-T Ethernet interface. It is recommended to connect this interface to the network to allow out-of-band management of the appliance.
Mandatory connections located on the NETSCOUT ASI Accelerator NIC:
- Monitor interfaces (MON): 4x SFP+ slots. These slots are empty and are to be equipped with compatible fiber optic transceivers. Attention: copper transceivers are not supported. At least one of these ports must be connected to a SPAN or TAP output. These ports are named (from top to bottom) if3, if4, if5 and if6.
Optional connections located on the appliance motherboard (primarily used for KVM):
- Serial Console 57600 baud, 8N1
- 4x USB 3
- VGA
- Network interface Eth1 (1000BASE-T, disabled)