Connecting a passive TAP: Difference between revisions

From wiki.comcert.com
Jump to navigation Jump to search
(Created page with " == Introduction == Passive Fiber Optic TAPs require no configuration. The cabling between the TAP and the monitor ports are somewhat special.   == Solution == === Fi...")
 
No edit summary
Line 2: Line 2:
== Introduction ==
== Introduction ==


Passive Fiber Optic TAPs require no configuration. The cabling between the TAP and the monitor ports are somewhat special.
Multi-mode and single-mode passive Fiber Optic TAPs require little or no configuration. While cabling the network - and site ports is straight forward, the cabling between the TAP output and the NETSCOUT Accelerator NIC is a bit special.


 
 
Line 8: Line 8:
== Solution ==
== Solution ==


=== Fiber optic cabling ===
 


The two fibers of the duplex LC-LC adapter on the TAP indicated with "monitor" are both used for transmission.
=== Cables required ===


You need a LC-LC fan-out cable.
The two fibers of the duplex LC-LC output of the TAP - indicated with "monitor" - are both used for transmission.
 
To connect to the NETSCOUT Accelerator NIC, you need a LC-LC-duplex to 2x LC-simplex fan-out cable. It is very easy to make a cable like that.
 
 
 
=== Connecting the TAP to the NETSCOUT accelerator NIC ===
 
Both LC-simplex connectors need to be connected to the input of two separate SFP/SFP+ ports on the NETSCOUT Accelerator NIC on the back of the appliance.
 
 
 
 
 
Inspect and clean all fiber connectors and ports before making a connection.
 
 
 
 
 
 

Revision as of 16:18, 10 March 2019

Introduction

Multi-mode and single-mode passive Fiber Optic TAPs require little or no configuration. While cabling the network - and site ports is straight forward, the cabling between the TAP output and the NETSCOUT Accelerator NIC is a bit special.

 

Solution

 

Cables required

The two fibers of the duplex LC-LC output of the TAP - indicated with "monitor" - are both used for transmission.

To connect to the NETSCOUT Accelerator NIC, you need a LC-LC-duplex to 2x LC-simplex fan-out cable. It is very easy to make a cable like that.

 

Connecting the TAP to the NETSCOUT accelerator NIC

Both LC-simplex connectors need to be connected to the input of two separate SFP/SFP+ ports on the NETSCOUT Accelerator NIC on the back of the appliance.

 

 

Inspect and clean all fiber connectors and ports before making a connection.