ISNG model 6695 Connections: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 34: | Line 34: | ||
=== Environment specifications === | === Environment specifications === | ||
Power supply: Dual auto-ranging hot-swappable, redundant supplies. 1200W: 200-240VAC, 8.5-7A, 50–60 Hz. | |||
Maximum power consumption: 1000W or 3412BTU/h. | Maximum power consumption: 1000W or 3412BTU/h. |
Revision as of 16:31, 18 July 2022
Network connections (3U appliance rear view)
Minimal connections (as shown)
Mandatory connections located on the appliance motherboard:
- Management interface (Eth0). This is a 10GBASE-T Ethernet port. Connect this port to your network. Optionally, you can connect a second management port (Eth1) for manage port redundancy.
- Dedicated remote management module (RMM). This is a 1000BASE-T Ethernet port. It is recommended to connect this interface to the network as well to allow out-of-band management of the appliance.
Mandatory connections located on the NETSCOUT ASI Accelerator NIC:
- Monitor interfaces (MON). Equipped with four SFP+ docks. These docks are empty and must be equipped with compatible fiber optic transceivers. Attention: copper transceivers are not supported. At least one of these ports must be connected to a SPAN or TAP output. These ports are named (from top to bottom) if3, if4, if5 and if6.
Optional connections
Optional connections located on the appliance motherboard:
- Serial Console 57600 baud, 8N1
- 4x USB 3
- VGA
- Network interface Eth1 (10GBASE-T)
Environment specifications
Power supply: Dual auto-ranging hot-swappable, redundant supplies. 1200W: 200-240VAC, 8.5-7A, 50–60 Hz.
Maximum power consumption: 1000W or 3412BTU/h.
Dimensions: 3U Rack Mount.
Weight: 27kg.