OptiView XG Remote UI

From wiki.comcert.com
Revision as of 15:16, 10 November 2020 by Bert (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

The OptiView Remote User Interface is identical to the application running on the tablet.  The application is installed on a PC and will connect to the Acquisistion Board of the OptiView XG.

 

Solution

Installation

Open a browser to http://<IP-OPVXG>

<IP-OPVXG> can be any IP used by OPVXG (network port, management port, wireless port) at the moment.

Download and select "Install Remote UI".

 

Use

The RUI application consists of two parts: the OptiView Brower and the actual Remote User Interface. 

Use the brower to connect to the OptiView.  If you are on the same subnet, the brower will find the OptiView automatically (without the need to enter its IP address).

 

Firewall

The RUI will use the following protocols and ports:

tcp/1695

udp/1695

and is a few (older) versions:

tcp/1697