PMA-2XX quick start guide

Introduction

COMCERT PMA-2XX is a custom-build appliance optimized for running NETSCOUT InfiniStream.  This guide will assist you in configuring the appliance for first use.  

 

Solution

Physical installation and connections

Please visit PMA-2XX Physical installation, connections and environmental specifications for detailed information on how to install the appliance and connect it to the network.

 

IP configuration

The appliance management (MGT) and out-of-band (iDRAC) interface comes pre configured with the following IP parameters.

Parameter	MGT (IP_PMA)	iDAC (IP_IDRAC)
IP address	192.168.0.1	192.168.1.1
IP subnet mask	255.255.255.0	255.255.255.0
Default router	192.168.0.1	192.168.1.1
DNS Server	192.168.0.1	192.168.1.1
Domain suffix	comcert.com	comcert.com
NTP Server	192.168.0.1	192.168.1.1

To access the appliance either by its management interface of out-of-band interface, use a laptop with a static IP address in the same IP subnet as the respective interface and a standard four-pair twisted-pair cable.  The management interface is only accessible using the ssh protocol.  The out-of-band interface is accessible by either https (preference) or ssh.   For default credentials please visit Default credentials .  Please make sure to change these default passwords and store them is a sale place.