AirMagnet Sensor Connections and environmental specifications

From wiki.comcert.com
Revision as of 12:13, 9 December 2019 by Bert (talk | contribs) (Created page with " == Introduction == COMCERT is using AirMagnet Sensor to monitor wireless networks remotely.   == Solution == === Electrical === The AirMagnet Sensor must be&nb...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Introduction

COMCERT is using AirMagnet Sensor to monitor wireless networks remotely.

 

Solution

Electrical

The AirMagnet Sensor must be connected to a PoE switch.  AirMagnet Sensor is a Type 1 powered device (PD), so the power sourcing equipment (PSE) must provide 15.4W of power.

 

Mechanical

AirMagnet Sensor (without antennas) measures 190x190x35mm and weights less than 500g.  DO NOT install the sensor in close proximity of a metal surface.

 

Network

AirMagnet Sensor is DHCP enabled and it will attempt to communicate to https://w-ame.comcert.com:443.  It is not possible to use a proxy server.  

 

 

Retrieved from "https://wiki.comcert.com/index.php?title=AirMagnet_Sensor_Connections_and_environmental_specifications&oldid=5233"