PMA-XX Environmental specifications
Introduction
These specifications are valid for both PMA-65, PMA-85 appliances.
Solution
Appliance rear view
This picture shows the connection on the rear of the appliance.
Network connections
IP remote management interface (iDRAC): 1x 1000BASE-T
Management ports (MGT1 & MGT2): 2x 1000BASE-T
- These ports provide a redundant connection with the network
- At least one of these ports must be connected
Monitor port (MON1 & MON2): 2x 1000BASE-T
- The purpose of these monitor ports will depend on the software running on de appliance
- Example1: on PMA-XX with a packet collector, these ports will be two ingress ports
- Example2: on PMA-XX with a flow collector, these ports will be assigned to the flow collector and provide a redundant connection with the network
- In both examples, at least one of these ports must be connected
Dimensions
Width: 434mm (19" sliding rails)
Hight: 42.4mm (1U)
Depth: 715mm
Weight
17.6kg (without disk)
Power
PSU: 2x 550W (IEC320 C14 connector)
Frequency: 50/60Hz
Voltage: 100-240V AC
Maximum current: 3.5A
Raw power consumption: 130W
Measured 7-day maximum power consumption: PMA-65: 114W / PMA-85: 203W
Heating
Raw heat dissipation: 444BTU/h
Measured 7-day maximum heat dissipation: PMA-65: 389BTU/h / PMA-85: 693BTU/h
Noise
A-weighted noise emissions in accordance with ISO 9296 (tested in accordance with ISO 7779): 53dBA
Environment
Storage: -40°C to 65°C and 5% to 95% RH
Operation: 10°C to 35°C and 10% to 80% RH