ISNG model 6695 Connections

Network connections (3U appliance rear view)

 

IS-06695-ZSJAB-J_RV.png

 

Minimal connections

Mandatory connections located on the appliance motherboard:

• Management interface (Eth0).  This is a 10GBASE-T Ethernet port.  Connect this port to your network. Optionally, you can connect a second management port (Eth1) for manage port redundancy.
• Dedicated remote management module (RMM).  This is a 1000BASE-T Ethernet port.  It is recommended to connect this interface to the network to allow out-of-band management of the appliance.

Mandatory connections located on the NETSCOUT ASI Accelerator NIC:

• Monitor interfaces (MON).  Equipped with four SFP+ docks. These docks are empty and must be equipped with compatible fiber optic transceivers.  Attention: copper transceivers are not supported.  At least one of these ports must be connected to a SPAN or TAP output.  These ports are named (from top to bottom) if3, if4, if5 and if6.

 

Optional connections

Optional connections located on the appliance motherboard (primarily used for KVM):

• Serial Console 57600 baud, 8N1 
• 4x USB 3
• VGA
• Network interface Eth1 (10GBASE-T)